Cotton Fusible Interfacing

Cotton Fusible Interfacing. A woven interfacing of pure cotton for adding body to and reinforcing small parts in ladies’ blouses or dresses.

• 110cm wide.
• Place the interfacing with the coated side on the wrong side of the fabric.
• Set the iron to wool/cotton.
• Cover with a damp cloth and press each area for about 15 seconds, without pushing the iron.
• Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly. If the adhesive has not taken, iron again as above.

This fabric is sold in half metres. Orders of multiple half metres are cut in one continuous piece, unless otherwise stated.